+91 93730 08466
Screen tubes and pipes
Screen cylinders
Flat panels and false bottoms
Candle filter elements
Water well screens
Header and hub laterals
Filter nozzles
Resin traps
Support grids
Sieve bend (DSM) screens
Centrifuge baskets
Pressure screen baskets
Screw press screens
Rotary drum screens
Passive intake screens
Coanda intake screens
Water and wastewater treatment
Water wells and groundwater
Sugar and distillery
Brewing, malting and beverages
Food processing
Mining and minerals
Oil, gas and petrochemicals
Chemicals, fertilisers and pharma
Power generation
Pulp and paper
Buildings and drainageConverter
300 micron to mm: 0.3 mm
300 microns is 0.3 mm, or 0.0118 inch. As a sieve opening it is 50 mesh on the ASTM E11 series. For a wedge wire screen, specify it directly as a 300 micron (0.3 mm) slot.
Opening300 µm
- Millimetres
- 0.3 mm
- Inches
- 0.01181 in
- Thou (mil)
- 11.81 thou
- Mesh
- 50 mesh
- Nearest coarser sieve
- 50 mesh, 300 µm
- Nearest finer sieve
- 50 mesh, 300 µm
Equivalent wedge wire slot: 300 micron (0.3 mm)
Wedge wire is specified by its slot directly, so a wedge wire screen has no mesh count. Quote the slot in mm or microns.
Your inputs and results go into the quote form, so an engineer can check them against your operating conditions.
Nearby sizes
Sizes near 300 microns
Swipe sideways to see the whole table.
What passes a 300 micron opening
As a general reference on the Wentworth grade scale, particles smaller than 300 µm pass: fine sand, very fine sand, silt, clay. Real separation also depends on particle shape, the screen's open area and how the screen is loaded.
The wedge wire equivalent
A wedge wire screen is specified by its slot, so the equivalent is a 300 micron (0.3 mm) slot. Because the V-shaped wire widens behind the slot, particles that pass the face do not wedge in it. See mesh to micron and slot size and how to choose slot and open area.