Skip to content
+91 93730 08466 Request a quote

Products

Wedge wire screen products

SIMO makes welded wedge wire screens and the equipment built from them: screen tubes and cylinders, flat panels and false bottoms, vessel internals such as laterals, nozzles and resin traps, process screens such as sieve bends and centrifuge baskets, and fabricated products from drainage grates to rooftop rainwater filters. Each is engineered to your specification or drawing.

01

Screens and elements

Wedge wire screen tubes with threaded ends laid on paper in a workshop

Screen tubes and pipes

Wedge wire screen tubes and pipe-based screens for laterals, well points and strainers, slots 25 microns to 25 mm, up to 6,000 mm long.

View details
Two large diameter wedge wire screen cylinders lying on a workshop floor

Screen cylinders

Wedge wire screen cylinders in four flow configurations, 25 to 800 mm diameter and up to 6,000 mm long, for reactors, drums and presses.

View details
Flat wedge wire screen panel set in a flanged stainless frame with bolt holes

Flat panels and false bottoms

Flat wedge wire screen panels and false bottoms for lauter tuns, malt kilns and dewatering decks, slots 25 microns to 25 mm.

View details
Wedge wire filter element fitted inside an opened stainless filter housing

Candle filter elements

Wedge wire filter elements for precoat candle filters, self cleaning filters and food, edible oil and chemical liquids, with fittings to suit.

View details
Square wedge wire inlet basket with an open top and flanged lip on a white background

Basket strainers

Wedge wire basket strainer baskets and elements for simplex, duplex and inline strainers, made to fit your housing, with MTC.

View details
Five large diameter wedge wire water well screen pipes stacked on a workshop floor

Water well screens

Continuous slot wedge wire water well screens to IS 8110:2019 for tube wells and borewells, made in Nagpur with MTC.

View details
Perforated steel pipe with wedge wire screen visible through the round holes

Sand control screens

Pipe-based and pre-packed sand control screens for oil, gas and water wells, wedge wire jackets built to your drawing.

View details

02

Vessel internals

Wedge wire header and lateral assembly with welded laterals on a central header

Header and hub laterals

Wedge wire header lateral systems and hub laterals for DM plants, softeners and condensate polishers, designed for even flow, with MTC.

View details
Large batch of stainless wedge wire filter nozzles with threaded stems on timber

Filter nozzles

Stainless wedge wire filter nozzles for sand, carbon and multigrade filter underdrains and softeners, threaded, welded or flanged, with MTC.

View details
Two stainless wedge wire resin traps, one showing the flanged inlet and internal screen

Resin traps

Wedge wire resin trap filters and inline strainers that catch escaped resin before it reaches pumps, in stainless steel with MTC.

View details
Circular wedge wire support grid with two support beams and a bolted flange rim

Support grids

Wedge wire catalyst support grids for reactors, plus bed support grids for adsorbers, filters and brewery vessels, segmented for manways.

View details
Round wedge wire outlet basket with a centre support beam and lifting lugs

Outlet baskets and collectors

Wedge wire outlet baskets and collectors for reactors, molecular sieve driers and tank outlets, retaining media ahead of pumps.

View details

03

Process screens

Stainless sieve bend screen with three curved wedge wire decks in a housing

Sieve bend (DSM) screens

Wedge wire sieve bend screens (DSM) for coal desliming, juice screening, starch and fibre recovery, reversible decks, 25 microns to 25 mm.

View details
Conical wedge wire centrifuge basket with black end rings standing on a timber pallet

Centrifuge baskets

Wedge wire centrifuge baskets and screen sections for coal, iron ore, sugar and crystal slurry centrifuges, built to OEM drawings with MTC.

View details
Cylindrical wedge wire screen basket with axial wires, machined end rings and a centre ring

Pressure screen baskets

Wedge wire pressure screen baskets for pulp stock preparation and fibre recovery, inflow or outflow, made to fit OEM screens, chrome optional.

View details
Two wedge wire screw press screen cylinders with external support rings in a crate

Screw press screens

Heavily reinforced wedge wire screw press screens for sludge, fibre and food waste dewatering, split or zoned, built for continuous torque.

View details
Wedge wire rotary drum screen with support rings seated in a stainless housing with a spray bar

Rotary drum screens

Wedge wire rotary screens for effluent, wash water, juice and fibre recovery, internally or externally fed, slots from 25 microns.

View details
Flanged cylindrical wedge wire intake screen packed in a timber crate beside a wrapped screen

Passive intake screens

Passive wedge wire intake screens, tee and single types, for river, reservoir and cooling water intakes, sized for low slot velocity.

View details

04

Fabricated products

Long stainless wedge wire grating panels stacked on a workshop floor

Drainage grates

Stainless steel drainage grates in wedge wire, SS 304 or SS 316L, with continuous slots and welded frames made to the channel.

View details

Pool and shower grates

Wedge wire pool overflow grate, shower drain and balcony grates in Duplex 2205 or SS 316L, straight or rolled to radius.

View details

Rooftop rainwater filters

Rooftop rainwater harvesting filter with a self-cleaning wedge wire screen in a stainless housing, sized to flow and pipe size.

View details
Water flowing over a curved Coanda wedge wire intake screen under open sky

Coanda intake screens

Coanda screen panels in stainless wedge wire for Tyrolean and side intakes on small hydro, irrigation and stormwater schemes.

View details
Inclined screen panels set in a concrete stream channel with water below

Fish screens

Stainless wedge wire fish screen panels, standpipes and tray screens for hatcheries, raceways, diversion and intake protection.

View details
Freestanding enclosure built from framed wire screen panels with doors, inside a shed

Architectural panels

Architectural wedge wire panels in stainless steel for facades, sunscreens, ceilings and balustrade infill, flat or curved, with fixings.

View details
Wedge wire floor panels laid across the floor of a stone walled building

Flooring panels

Stainless wedge wire flooring panels for walkways, mezzanines, drying and malt floors, designed to span and load, with anti-skid option.

View details

Custom engineering

Engineered to your specification, drawing or sample

Share the process conditions, a drawing or a photo of the screen to be replaced. Our engineers check slot, open area and strength with CFD and FEA where it matters, send a drawing for your approval, then build and dispatch with a Mill Test Certificate.

Upload a drawing WhatsApp an engineer
Six steps from enquiry to dispatch: send details, engineering review, CFD and FEA, drawing approval, manufacture, dispatch with Mill Test Certificate

Swipe to see the full drawing.

  1. Share the requirement, a drawing or a photo of the existing screen.
  2. Engineering review of slot, open area, profile wire and support rod.
  3. CFD and FEA where the design calls for them.
  4. Drawing approval by you before anything is cut.
  5. Manufacture at our works in Nagpur.
  6. Dispatch with a Mill Test Certificate.

Send us your specification

Our engineers will connect with you within a working day. Fill in what you know; "Not sure" is a fine answer. Fields marked are needed.

What you need
Medium, flow, temperature, pressure, or what goes wrong with the current screen.
Attach a drawing or photo PDF, DWG, DXF, STEP, JPG or PNG, up to 20 MB each.
How we reach you

We use your details only to answer this enquiry and keep a record of it, as our privacy notice explains (Digital Personal Data Protection Act, 2023). No marketing emails.

Or email sales@simoscreens.com