Converter
16 mesh to micron: 1,180 µm (1.18 mm)
16 mesh is an opening of 1,180 microns, which is 1.18 mm or 0.0465 inch, on the ASTM E11 US standard sieve series. The nearest wedge wire equivalent is a 1,180 micron (1.18 mm) slot, because wedge wire is specified by its slot rather than a mesh count.
Opening1,180 µm
- Millimetres
- 1.18 mm
- Inches
- 0.04646 in
- Thou (mil)
- 46.46 thou
- Mesh
- 16 mesh
- Nearest coarser sieve
- 16 mesh, 1180 µm
- Nearest finer sieve
- 16 mesh, 1180 µm
Equivalent wedge wire slot: 1,180 micron (1.18 mm)
Wedge wire is specified by its slot directly, so a wedge wire screen has no mesh count. Quote the slot in mm or microns.
Your inputs and results go into the quote form, so an engineer can check them against your operating conditions.
Nearby sizes
Mesh sizes near 16 mesh
| Mesh | Micron (µm) | mm |
|---|---|---|
| 10 mesh | 2,000 | 2 |
| 12 mesh | 1,700 | 1.7 |
| 14 mesh | 1,400 | 1.4 |
| 16 mesh | 1,180 | 1.18 |
| 18 mesh | 1,000 | 1 |
| 20 mesh | 850 | 0.85 |
| 25 mesh | 710 | 0.71 |
Swipe sideways to see the whole table.
What passes through 16 mesh
As a general reference on the Wentworth grade scale, particles smaller than 1,180 µm pass: coarse sand, medium sand, fine sand, very fine sand, silt, clay. Real separation also depends on particle shape, the screen's open area and how the screen is loaded.
The wedge wire equivalent
A wedge wire screen is specified by its slot, so the equivalent is a 1,180 micron (1.18 mm) slot. Because the V-shaped wire widens behind the slot, particles that pass the face do not wedge in it. See mesh to micron and slot size and how to choose slot and open area.